[Offer to Sell] Brushing Silicone Rubber for Plaster Casting Cornice/Domes |
|||||||||||||||||
|
|
|||||||||||||||||
| Detailed Product Description Brushable silicone rubber (RTV-2) application: Production mold casting wax, gypsum, concrete or resins (urethane, polyester, etc.). Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, place couldn’t pour rubber over the above etc. For make a mold by brushing (or spraying) rubber onto the model. Rubber will hold a vertical surface and will reproduce the finest detail brushed onto the model in layers until a suitable thickness is built up. The rubber is allowed to cure and a support shell is applied prior to demold. The advantage of making a mold by brushing rubber onto the model is that it minimizes the amount of rubber used, saving material costs. Sprayable Rubber for making fast sprayed rubber molds that have the best release properties for production casting of resins, plaster, etc. It is a tin silicone rubber that self-thickens for making concrete Spray able -on molds. Properly applied, mixed 100A: 5B by weight, rubber quickly develops thixotropy when mixed in air. Cured with negligible shrinkage to a durable mold rubber good for production casting resins, foams, concrete, plaster and other materials. Application of a support shell is achieved by spraying over the rubber mold after it has fully cured. Silicone Putty: Mix & Apply By Hand Silicone putties are two-component, tin-cure silicone putties that can be applied "on-site"--directly to almost any model; Capturing the finest detail and curing within minutes. Silicone Putty has been used to make molds of valuable antiques and archeological models and can be used to make fast molds of sculpture, prototypes, candles, picture frames, coins, etc. Also can cast wax, gypsum and a variety of resins into Putty molds. 730# white, the usage for poly crafts, lighting and candles, multiple piece molds for large product. Model: 730 silicone rubber Appearance: White Mixing proportion of curing agent(%) 2 Operating time ( hours ): 0.5 Curing time( hours ): 2-4 Hardness (shore A): 28-32 Viscosity (CS): 28000-30000 Tensile-strength ( kgf /cm2 ): ≥35 Tear-strength (kgf /cm2 ): ≥20 Elongation-break(%): ≥ 470 Retractility(%): ≤0.3 Packing (kg/pail ): 25, 200 The datasheet just for reference, need more information, please feel free to contact us, we can produce silicone follow your request. Silicone rubber using instruction: Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 2g curing agent for mixing evenly (silicone rubber and curing agent must be measured accurately). After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. If you don't have vacuum machine, please add 1.2% or 1.5% curing agent so that the bubbles can bubble itself. Since the less curing agent you add, the slower the mould will curdle, the bubbles will bubble out itself. Any questions of silicone rubber for mold making, please feel free to contact apple: TEL: 086-755-89948013 FAX: 086-755-89948030 MOBILE:086-18938867581 E-MAIL: eileen(at)szrl(dot)net 18938867581 (at) qq(dot) com applebest88(at)hotmail(dot)com Website: www(dot)szrl(dot)net |
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|
| Home | Privacy
Statement | Terms
of Use | Advertising | Partners | Contact
Us | Help
© Copyright 2001-2024, Trade-Database.com. All Rights Reserved.
|