[Offer to Sell] Pad Printing Silicone Rubber |
|||||||||||||||||
|
|
|||||||||||||||||
| Pad Printing Silicone Rubber 901# 902# 912# 916# 918 silicon rubber Usage for Pad Printing silicone rubber: Pad printing silicon rubber is mainly applicable to the printing of irregular patterns on plastics toys, electroplating products, electronic toys, trademarks, artwork gifts, and stationery, etc. Features of Pad Printing silicone rubber: The silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface. Pad Printing silicone rubber with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining. Instruction for Pad Printing silicone rubber 1． Firstly,clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent. 2. The normal proportion between the pad printing silicon and the silicone oil depends on the requirements of the customers. If pattern with big area to be printed, a soft silicon pad is needed and the amount of silicone oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not . The hardness of general pad printing silicone rubber is approximate of 15A°~-25 A°. 3. General mixing proportion is as follows: add 30g silicone oil into 100g silicon with the hardness of the silicon pad being 20A°, which is suitable for the pad printing for alloy car and products with small patterns and contact areas. If a big pressure contact surface or a soft silicon pad is needed, the mixing proportion between the silicon and the silicone oil can be 100:30-100:50. 4. The amount of the curing agent and the chemical reaction with the silicon is as follows: mix 100g silicon and 50g silicone oil sufficiently and evenly, then add the curing agent which is 2%-3% of the total weight of the silicon and the silicone oil, mixing for 2-3 minutes, and then deair to remove the air bubbles . The time of deairring generally does not exceed 10 minutes. If the deairing time is too long,it may cause fast curing of the silicon and impact the quality of silicon. Payment Terms:L/C, T/T Port: Shenzhen Minimum order quantity:200kg Supply ability:8 tons/day Deliverly Time: 3 days after our bank getting your payment Package:20kg/drum and 200kg/drum If you need more information about RTV silicon rubber for manual mold making, please feel free to advise about your idea, then we will follow it to recommend the most suitable silicon rubber for your products. Looking forward to hearing from you website: www (dot) szrl (dot) net E-mail: hyw(at)szrl(dot)net Helenliao888(at)hotmail(dot)com contact: Helen Telephone:0086 755 89948019 0086 15889404068 |
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|
| Home | Privacy
Statement | Terms
of Use | Advertising | Partners | Contact
Us | Help
© Copyright 2001-2024, Trade-Database.com. All Rights Reserved.
|