[Offer to Sell]

PTC Thermistor Resettable Fuse 39 Ohm 265V 1.2A Murata PTGL09AR390M9C61B0 Cross

AMWEI PTC Thermistor for Circuit Overcurrent Protection 39 ohm 1.2A 265V in radial leaded resin coated, ceramic diameter D11mm, T5.5mm, Pin length L25mm min, space 5mm, Murata PTGL09AR390M9C61B0 PTGL09AR390N0B52A0 POSISTOR Cross, More detail can be founded in https://amwei.com/murata-ptgl09ar390m9c61b0-ptc-39-ohm-265v/
Features
Application: Overcurrent protection, Overload, Short circuit protection.
Best suited to meet the requirements for power supplies motor transformer protection.
Error-free operations are assured by rush current.
Circuit is protected until current is turned off.
Restores the original low resistance value automatically once the overload is removed.
Non-contact design leads to long life and no noise.
Durable and strong against mechanical vibration and shock.
Electrical Specifications
Resistance @25C R25 :39 ohm +/- 25%
Rated voltage (RMS): 230 V
Maximum operating voltage Vmax: 265 V
Maximum withstanding voltage Vwith: 350 V
Maximum permissible repetitive turn over current Imax: 1.2A
Hold Current, Non-trip Current, at +25C : 130 mA
Hold Current, Non-trip Current, at +60C: 100 mA
PTC Thermistor Trip Current, Operating Current at +25C It: 250 mA
Curie temperature (Switch temperature): 120В±10C
Operating ambient temperature range (V=0): -40~+125C
Operating ambient temperature range (V=Vmax) : 0~60C
Packaging Information
Loose bulk, or Production tape package.
PTC Thermistor Current Protector Resettable Fuse are ceramic-based doped barium titanate PTC thermistors discs, in through-hole rugged design, used instead of conventional fuses to protect load, such as transformers, instruments, power supply, or electronic circuit, against overcurrent overload and short circuit, for circuit protection inrush current limit function, by utilizing ceramic PTC thermistors thermal property that resistance increases sharply at Curie Temperature (also called Switch Temperature, Reference Temperature), reduces the current flow to the load to an admissible low level.
PTC thermistors protector not only respond to inadmissibly high currents but also if a preset temperature limit is exceeded.
PTC thermistor over-current protector limits the power dissipation of the whole circuit by increasing their resistance and thus reducing the current to a harmless residual value.
In contrast to conventional fuses, PTC thermistor resettable fuses do not have to be replaced after elimination of the fault but resume their protective function immediately after a short cooling-down time.

Category: Electronics & Electricals / Electronic Instruments

Placement Date: Sep 30, 2024 GMT

Company name: AMWEI Thermistor	Company type: Importer, Manufacturer, Service, Other
Contact Person: (Premium Membership required)	Email: Send Inquiry
Address: (Premium Membership required)	City: (Premium Membership required)
State: (Premium Membership required)	Country: China
Zip: (Premium Membership required)	Web: (Premium Membership required)
Phone: (Premium Membership required)	Fax: (Premium Membership required)

Offers list from this company: [Sell] PTC Thermistor Resettable Fuse 120 Ohm 265V Murata PTGL05AR121M9N51B0 Cross [Sell] PTC Thermistor Resettable Fuse 39 Ohm 265V 1.2A Murata PTGL09AR390M9C61B0 Cross [Sell] Screw Clamp PTC Lug Sensor 100C 470 Ohm Murata PTFM04BD471Q2N34BS Cross [Sell] Screw Clam PTC Lug Sensor 100C 2.2K Ohm Murata PTFM04BD222Q2N34BS Cross [Sell] EPCOS B59880C0120A070 Cross PTC Thermistor 230V 70 Ohm Current Protect Leaded Disk Coated [Sell] Screw clamp PTC Lug Sensor 80C 2.2K Ohm Murata PTFM04BF222Q2N34BS Cross [Sell] AMWEI Linear Silicon PTC Thermistors Temperature Sensors, Alternative to Philips NXP KTY84, KTY83, KTY81