[Offer to Sell] Liquid silicone for mold HY625# |
|||||||||||||||||
|
|
|||||||||||||||||
| Liquid silicone for mold HY625# Usage: Liquid silicone for mold HY625# is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts etc Liquid silicone for mold HY625# Description: 625# Liquid silicone for molds ( Pourable silicone\Soap mould silicone ) is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This Liquid silicone for molds ( Pourable silicone\Soap mould silicone ) is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is lower than 2‰. Operation Instruction for Liquid silicone for mold HY625#: The product is white or red flowing liquid with general hardness of 34—38A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed./span> (Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.) The proportions and reactions of the curing agent and the silicon are listed as follows: 　1. Adding curing agent 1%, the silicon can still be operated within 2.5 hours and can be demoulded after 6-8 hours. 　2. Adding curing agent 2%, the silicon can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours. 　3. Adding curing agent 3%, the silicon can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours. 　4. Adding curing agent 4%, the silicon can still be operated within 10 - 15 minutes and can be demoulded after 1 -1.5 hours FAQ of Liquid silicone for mold HY625# 1. Why is the appearance of the finished mold striate and unsmooth? It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the Liquid silicone for mold HY625# evenly on the product. In this case, the problem can be avoided. Any questions, please feel free to contact Aaron: TEL: 086-755-89948006 FAX: 086-755-89948030 MOBILE:086-18938867535/13622300503 Website: www(dot)szrl(dot)net E-MAIL: xu2478276(at)msn(dot)cn/ 18938867535(at)qq.com Skype : aaronxu9 |
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|
| Home | Privacy
Statement | Terms
of Use | Advertising | Partners | Contact
Us | Help
© Copyright 2001-2024, Trade-Database.com. All Rights Reserved.
|