1. Oak Board, Oak Panel, Finger jointed Oak panel 2. Sizes: 3000/4000x610/650/720/900/1220mm 3. Thickness: 18, 20, 25, 27, 28, 30, 36, 38, 40, 45mm Grade: AB or CC/CD Grade: face grade A, underside grade B A: no defects, no knots, no sap, good bright, even colour, very a little discoloration B: discoloration and sap allowed, dead knots not exceeding 1mm, live knots allows, good bright colour C: a little discoloration, limitless sap, a few knots, dead knot not exceeding 1cm, a little decayed D: limitless discoloration, limitless sap, knots below 30mm allowed. 1. Species: Oak, Ash, Walnut, Maple, Beach, Pine. 2. Thickness: -0mm+0.2mm, Width: -0mm+5mm, Length: -0mm+10mm. Lamella/Stave Width: 30-60mm . Random length of Stave:150-700mm. 3. Size-cut: worktop must be cut precisely in 90 angle. 4. Moisture Rate: 8%-12%. Sanding: 240 grit (face); 180 grit(back). 5. Glue: Finnish Dynea & Japanese Koyo(according to DIN EN 204) without open gluelines. , 6. Finger Joints: Quality of joints between lamellae will totally exclude breakout, gaps, holes and excess glue on Top face. Ends well trimmed; finger joint hiding at side. 7. Production Capacity: 300m3 per month. 8. PACKING: a strong shrink wrap, corners reinforced, very safe packaging (plastic bands), fiberboard covering, strong wood pallets. |