Introduction: The C purline formed by this C purline forming machine has many advantages: well compressive strength and flatness; automatic measureing, cutting and punching; high-level of automation and conviently installation. It can be used in the main body stress structure of the large and medium-size enterprises civil construction, like the plant, the warehouse, locomotive shed, hangar, exhibition building, theatre, stadiums, roofing load-bearing load and wall surface support of the arbour. This machine is composed of manual stacker, the pesestal of the staker, feed leading table, flattening device, hydraulic station, computer control box. Main parameter: 1. Install size:13500mm*2200mm*1500mm 2. Rollers: 13-15 rows 3. Rolling material: Gcr 15 4. Main motor power:11 KW 5. Hydraulic unit power: 11 KW 6. Pressure of the hydraulic unit: 18-20Mpa 7. Productivity: 9-10 m/min 8. Punching material: Cr12 9. Electric control system: PLC vector inverter 10. Raw material thickness: 1.5-3.0mm 11. Forming standard: 80-300 12./ \ shaped rib (optional) Usage:shape purlin Model Section size h(mm) b(mm) c(mm) t(mm) C80 80 40 15 2.0-2.5 C100 100 40 20 2.0-3.0 C120 120 50 20 2.0-3.0 C140 140 50 20 2.0-3.0 C160 160 70 20 2.0-3.0 C180 180 60 20 2.0-3.0 C220 220 80 20 2.0-3.0 C240 240 70 20 2.0-3.0 C250 250 80 20 2.0-3.0 C260 260 80 20 2.0-3.0 C280 280 100 20 2.0-3.0 C300 300 100 20 2.0-3.0 Z Shaped Purlin Forming Machine Usage:shape purlin Model Section size h(mm) b1(mm) b2(mm) t(mm) Z100 100 50 54 2.0-2.5 Z100 100 50 54 2.0-3.0 Z120 120 50 54 2.0-3.0 Z120 120 50 54 2.0-3.0 Z140 140 50 54 2.0-3.0 Z150 150 60 64 2.0-3.0 Z150 150 60 64 2.0-3.0 Z160 160 60 64 2.0-3.0 Z160 160 60 64 2.0-3.0 Z180 180 70 74 2.0-3.0 Z180 180 70 74 2.0-3.0 Z200 200 70 74 2.0-3.0 Z200 200 70 74 2.0-3.0 Z220 220 80 84 2.0-3.0 Z220 220 80 84 2.0-3.0 Z240 240 80 84 2.0-3.0 Z240 240 80 84 2.0-3.0 The Z purline formed by this Z purline forming machine has many advantages: well compressive strength and flatness; automatioc measureing, cutting and punching; high-level of automation and conviently installation. It can be used in the main body stress structure of the large and medium-size enterprises civil construction, like the plant, the warehouse, locomotive shed, hangar, exhibition building, theatre, stadiums, roofing load-bearing load and wall surface support of the arbour. This machine is composed of manual stacker, the pesestal of the staker, feed leading table, flattening device, hydraulic station, computer control box. Main parameter: 1. Install size:13500mm*2200mm*1500mm 2. Rollers: 15 rows 3. Rolling material: Gcr 15 4. Main motor power:11 KW 5. Hydraulic unit power: 11 KW 6. Pressure of the hydraulic unit: 18-20Mpa 7. Productivity: 9-10 m/min 8. Punching material: Cr12 9. Electric control system: PLC vector inverter 10. Raw material thickness: 1.5-3.0mm 11. Forming standard: 80-300 |