| Construction Mesh High Ribbed Formwork is manufactured from hot-dipped galvanized steel sheets. Because its meshes and U patterns, it has better anti-stress capability and forming flexibility than normal metal lath. This product has excellent engineering quality, construction security and widely used in tunnels bridges, valve basement systems, sewage systems, subways, retaining walls, nuclear power plants, shipyards, water pools and marine engineering works and high rise building projects and non-regular or bending pattern etc. as concrete permanent assembly-free formwork. concrete permanent assembly-free formwork. Reinforced brickwork Reinforced brickwork mesh is preferable to un-reinforced brickwork in all types of building. When embedded into the normal thickness of a brickwork-joint at every third joint, it forms an integral structure, which is strengthened against vibration, temperature change and tensional stresses (especially on reclaimed ground). Expanded Corner Bead Expanded Corner Bead have a smooth round nose bead with Diamond Mesh wings for the keying of plaster right up to the nose of the bead. It is designed to provide strong corner reinforcement for conventional plaster applications. A solid metal nose provides a straight, rigid ground and the flanges can be easily flexed over irregular, uneven surfaces. Easily install using standard industry practice. thickness:0.3-0.5mm; material:Galvanized steel, stailess steel wing size: normally 45mm_65mm length: normally 2.4m_3.0m we can produce it as your detailed requirements Wire Mesh for Construction Safety In the construction of buildings, vertical wire mesh for safety is used to circle the building site, in order to prevent the construction materials or workers to fall down from higher places. Applications of Vertical Wire Mesh for Construction Safety: To prevent the people or articles from falling down, or to avoid possible harms caused by falling articles and to protect the workers in high places and the passing pedestrians, also to keep the site clean. Reinforced brickwork Reinforced brickwork mesh is preferable to un-reinforced brickwork in all types of building. When embedded into the normal thickness of a brickwork-joint at every third joint, it forms an integral structure, which is strengthened against vibration, temperature change and tensional stresses (especially on reclaimed ground). Expanded Corner Bead Expanded Corner Bead have a smooth round nose bead with Diamond Mesh wings for the keying of plaster right up to the nose of the bead. It is designed to provide strong corner reinforcement for conventional plaster applications. A solid metal nose provides a straight, rigid ground and the flanges can be easily flexed over irregular, uneven surfaces. Easily install using standard industry practice. thickness:0.3-0.5mm; material:Galvanized steel, stailess steel wing size: normally 45mm_65mm length: normally 2.4m_3.0m we can produce it as your detailed requirements |
