| Rubber Conveyor Belt For Stone Crusher 1. Application It is used for cracking crude rubber, waste tire rubber, tube and breaks rubber materials. 2. Features 1. The rolls are made of chilled alloy cast iron with wear-resistant and hard surface; the back roll is fluted one 2. The bored rolls can be cooled homogeneously 3. The protective device is provided to protect the main parts from damage due to overload 4. The reverse current plugging system is provided above the rolls. In case of emergency, the safety rod is pulled down and the rolls will stopped immediately 5. Roll gap can be adjusted conveniently by turning the handwheel 6. The bedplate of the machine is integral or separated, so the installation is convenient 7. The transmission system adopts either hard tooth flank dual axis reducer or NGW hard tooth flank planet reducer, which has compact structure, lose noise an high efficiency 8. The seal structure with special design can eliminate the leaking phenomenon of lubricating oil Parameters/version XKP-400 XKP-450 XKP-560 XKJ-400 XKJ-480 Front roll diameter(mm) 400 450 560 400 480 Back roll diameter (mm) 400 450 510 480 612 Roll length (mm) 600 650 800 650 800 Front roll surface speed (m/min) 17.32 23.2 25.56 18.01 26.6 Friction ration 1:1.38 1:1.38 1:1.30 1:1.88 1:1.75 Max, nip (min) 8 8 15 10 15 Feeding capacity per (kg) 200-300 600-800 -1500 -300 -500 Power(kw) 45 55 75 55 75 |
