| 1. Adopting NIR low lightening to create infrared ray, which activates the glue, saves energy and improves efficiency. 2. By using of duty cycle controlling system, the machine is ready for production in few minutes. Every sole can be heated under average, proper temperature. The activation effect is fine. 3. The duty cycle can be set according to different materials, which make production management easier. It can apply to different shoe-making methods. 4. With decent and proper design, the oven on the machine can be combined and moved according to capacity and shoe-making methods. Installation and operation are easy and fast. 5. The second layer adopts adjustable double-way conveyer, and the first layer is equipped with heat-resistant PVC belt, upper and sole are carried at the same time in different layer. Infrared ray feature: 1. Infrared tube is with around 8000-10000 working hours. 2. When the ray arrives, the energy arrives"; the machine will come to use after starting in a short time. 3. Heat is delivered through radiation. The electric power utilization is the biggest, and exhausting is the least. 4. the all-directions infrared ray overlays, having no dead angle. 5. With the most suitable wave length of infrared ray, it will penetrate deeply the glue. 6. The length of assembly line can be moved on the conveyer according to required capacity. LENGTH: 12000-15000 / 15000-18000mm DIMENSION: 1000*1500*2000 / 1500*2000*2500mm POWER: 37KW/380V 48KW/380V OUTPUT: 1200-1500/10HR / 1500-2500/10H |
