[Offer to Sell]

Wear Resistant Ceramic Roller

No.1 Introduction:
Aiming at solving the defects of the traditional steeliness rollers, such as when encountered acid, alkali and salt, they are easy to get corrosive, sticky, abrade, and due to getting stuck of the axletree, the belt is easy to lacerate as well as their short service life, etc. Our company has succeeded in developing wear-resistant ceramic rollers. After the terminal operating results in iron and steel, chemical, fertilizer, mining, power plant, salt works and shipside industries show that the products are not only of wear and acid and alkali salt resistance , anti-oxidation, operation stability, security features, but also can effectively prevent the belt deviation, reduce partial loss of belt, prolong its service life, reduce the manpower, material resources and time caused by replacing rollers frequently, lower operating costs and improve the efficiency of belt conveyor. As operating under harsh environment in the open air, their service life is 3-5 times longer than the traditional one.
No.2 product advantages:
1. Corrosion resistance.
2. Strong hardness and abrasion resistance.
3. Entire hermetic sealing.
4. On the Ceramic surface forms a layer of oxide film, it doesnГўв‚¬в„ўt have any binding or response to any substance.
5. 2-5 times longer service life than steeliness roller, furthermore it can reduce belt abrasion and prolong service life of belts.
6. Cost-effective, it can reduce the integrated costs of the belt conveyor and repairing.
No.3 Technical Parameters:
Compressive strength: 145 Mpa
Flexural strength: 80 ~ 120 Mpa
Hardness (MohsГўв‚¬в„ўs) :more than 7
Adaptable Temperature: -80 degree to 180 degree
Water absorption: less than1%
Density: 2.8 g/cm3
Abrasion Rate: less than1.0
Service life of Ceramic roll :more than 10 years
Service Life of Axletree: less than 3 years (about three years to replace the Axletrees)
Allowed Axletree Temperature:less than 100 degree
Applicable Belt-width: 500 to 1400 mm
Specifications No.: TD75, DT Ⅱ

Category: Machinery & Tools / Machinery

Placement Date: Sep 11, 2008 GMT

Company name: Jiangsu Chenggong Machinery Manufacturing Co., Ltd	Company type: Importer, Manufacturer, Other
Contact Person: (Premium Membership required)	Email: Send Inquiry
Address: (Premium Membership required)	City: (Premium Membership required)
State: (Premium Membership required)	Country: China
Zip: (Premium Membership required)	Web: (Premium Membership required)
Phone: (Premium Membership required)	Fax: (Premium Membership required)

Offers list from this company: [Sell] PPKG-series Two-Level Deflection Switch [Sell] LL series of Material Leakage Detector [Sell] Galvanized Spiral Gas Tube [Sell] Galvanized Spiral Gas Tube [Sell] Galvanized Spiral Gas Tube [Sell] LSKG-Ⅰ Series Two-way Pull-Cord Switch [Sell] DH-3 Skid-detector [Sell] DH-2 Skid-detector [Sell] CGXBJ-3 Electrical Conveyor Belt Repair Vulcanizer [Sell] CGXBJ-2 Electrical Conveyor Belt Repair Vulcanizer [Sell] CGXBJ-1 Electrical Conveyor Belt Repair Vulcanizer [Sell] DH-5 Skid-detector [Sell] CGSLX Series of Longitudinal Avulsion Alarm Equipment [Sell] BPJ-4 Wire Rope Conveyor Belt Electric Stripped Machine [Sell] BPJ-3 Conveyor Belt Stripped Machine [Sell] Wear Resistant Ceramic Roller [Sell] Electrical Water Cooling Belt Vulcanizer [Sell] Electrical Conveyor Belt Vulcanizer